Most don’t know. 12 brilliant ways to use WD-40 around the house

3. Cleaning and Protecting Garden Tools
Garden tools are prone to rust and dirt buildup. After cleaning your tools, spray them with WD-40 to remove any remaining dirt and provide a protective layer against rust. This will extend the life of your tools and keep them in good working condition.
4. Preventing Snow Buildup on Windows
In winter, snow and ice can accumulate on windows, making them difficult to open. Spraying WD-40 on the outside of your windows can create a barrier that prevents snow and ice from sticking, making it easier to clear them off.
5. Unsticking Gum from Surfaces
If gum ends up stuck on a surface, WD-40 can help remove it. Spray a small amount on the gum, let it sit for a few minutes, and then gently scrape it off with a plastic scraper. The gum should come off easily without damaging the surface.
6. Polishing and Protecting Stainless Steel Appliances
WD-40 can be used to polish and protect stainless steel appliances. Spray a small amount on a microfiber cloth and wipe down the surface. It will remove fingerprints and smudges while leaving a protective layer that resists future marks.
7. Lubricating Squeaky Door Hinges
One of the most common uses for WD-40 is to lubricate squeaky door hinges. Apply a small amount directly to the hinge and move the door back and forth to work the lubricant in. The squeak should disappear, leaving the door operating smoothly.
8. Removing Crayon Marks from Walls
Crayon marks on walls can be a challenge to remove, but WD-40 makes it easy. Spray a small amount on a cloth and gently rub the crayon marks. The lubricant will lift the wax without damaging the paint, restoring your walls to their original state.
9. Protecting Leather Furniture
WD-40 can be used to protect and condition leather furniture. Apply a small amount to a cloth and gently rub it into the leather. This will help repel stains and keep the leather supple and shiny.
10. Cleaning Tile Grout
Tile grout can accumulate dirt and grime over time. Spray WD-40 on the grout lines and let it sit for a few minutes before scrubbing with a brush. The lubricant will help loosen the dirt, making it easier to clean and leaving your tiles looking fresh.
11. Preventing Rust on Outdoor Metal Furniture

continued on next page